Audió / DJ Tartozékok - U processzorok (43)

Seer PS Hangfal processzor

Kiállítási darab! Ajánlatunk kizárólag erre az 1 db termékre vonatkozik. TC Electronic D-Two Multitap Rhythm Delay: a D-Two bevezetésével a TC Electronic-nak ismét sikerült kifejlesztenie egy élvonalbeli technológiát, és így bővíteni annak lehetőségét, ah

Passive DI-Box Eingangslevel: wählbar von 0 dB, -20 dB,-40 dB Instrumenteneing: 50 kΩ unsymmetrisch 6,3 mm Klinke Parallel (Link) Ausgang: 50 kΩ unsymmetrisch 6,3 mm Klinke SymmetrischerAusgang: 600 Ω symmetrisch XLR Buchse Groundlift: schaltbar Gehäuse:

Az LDMS828 két sztereó és hat monó csatornával rendelkezik, mindegyikhez LED-es szintjelző tartozik, a be- és kimenetek elektronikusan szimmetrizáltak. Két monó csatorna sztereó jackkel van szerelve, a többi csatlakozó XLR aljzat. A sztereó csatornáknak k

• Selectable splitter/mixer function • Wide range headroom • 8 inputs • 8 outputs The AS-8 can be used for several purposes. Due to its intelligent design the users can easily switch between a controllable audio mixer with several inputs, or a signal s

• Jack TRS & RCA input • Separate volume control • 2x 4 outputs • Road proof housing Frequency Response: 20Hz-20KHz Inputs: 6,3 TRS Jack, RCA Outputs: 6,3 TRS Jack (8x) Output impedance: 2x 50 Ohm Output power: 2x 50mW @ 32Ohm Power supply: 18V A

• 48 Khz, 64Bits Sample rate • 5 parametric EQ's each in- and output • USB interface and user-friendly software included • 50 User Presets DSP: Sample rate: 48 kHz, 64 bits NXP (Philips) DSP 5-Bands Input EQ: EQ Selections: Allpass, Bell, High Shelf,

• 48 Khz, 64Bits Sample rate • 5 parametric EQ's each in- and output • USB interface and user-friendly software included • 50 User Presets DSP: Sample rate: 48 kHz, 64 bits NXP (Philips) DSP 5-Bands Input EQ: EQ Selections: Allpass, Bell, High Shelf, L

10355030 Distributes the signal of 1 audio source to 4 sets of headphones 4 channels with separate level controls and headphone outputs All connections via 6.3 mm jacks (1/4") Operation via supplied power unit Power supply: 12 V DC, 150 mA Input impedance

10355031 Distributes the signal of 1 audio source to 4 sets of headphones 1 stereo input (switchable to mono) via RCA, 3.5 mm and 6.3 mm jack connectors 4 separately controllable headphone outputs via 6.3 mm jacks Operation via supplied power unit Power s

10355050 +48 V phantom power for condenser or electret microphones Ideal accessory for mixers without phantom power 1 microphone input, XLR (bal.) 1 line output, XLR (bal.) Operation via supplied power unit Rugged gray metal housing Power supply: 18 V AC

D1943 Frequency Response: 10Hz-40KHz Noise Level: 250KΩ Load Impedance: >600 Ω Dimensions: 55 x 135 x 145mm (HxWxD) Weight: 0,65 Kg

Input: 6,3mm Jack Link: 6,3mm Jack Output: XLR Male Input Impedance: 50,000 Ohms Output Impedance: 500 Ohms Frequency Response: 30 – 50,000 Hz (1 dB) THD at 400 Hz: 0.003% Fixed Natural Attenuation: 20 dB Attenuation Settings: 0, 20, 40 dB Crosstal

• Switchable Phantom power • Switchabel low cut • Level control • Low noise preamps Frequency Response: 20Hz-20KHz Inputs: XLR/Jack Combo Outputs: XLR male Input sensitivity: -50dBV Max input voltage: -4 dBu Max output voltage: +22 dBu Power supp

10355026 Distributes the signal of 3 stereo audio sources to 1 output 3 stereo RCA input channels with separate level adjustment 1 stereo RCA master output, adjustable 2 headphone outputs (6.3 mm jack), common level adjustment Operation via supplied power

• 2 stereo inputs • 2 mono inputs • Balanced outputs • Selectable line/instrument mono inputs Frequency Response: 20Hz-20KHz Inputs: RCA, XLR/Jack Combo Outputs: XLR male Input Impedance line: 1Meg Input Impedance: 50 kOhm Output Impedance: 12 KOhm

10355040 For connecting a turntable via stereo RCA sockets RCA output for connecting active speakers or stereo system Can be connected directly with the power amplifier via jack socket Ground terminal for avoiding hum Operation via supplied power unit Pow

• Road proof housing • High quality components • Professional balanced XLR outputs • Level control Frequency Response: 20Hz-20KHz Inputs: XLR/Jack Combo, RCA Outputs: XLR male, RCA Input sensitivity RCA in: -10 dBv Input Impedance RCA in: 10 kOhm

10355045 1 microphone, XLR (bal.) or 6.3 mm jack (unbal.) Variable gain control (6-50 dB) Phantom power can be switched on Clip LED 1 line output, XLR (bal.) or 6.3 mm (unbal.) Operation via supplied power unit Power supply: 12 V DC, 150 mA Input impedanc

10355051 Phantom power supply for condenser or electret microphones Selectable +12/ +48 V power supply Ideal accessory for mixers without phantom power Inputs and outputs via balanced XLR connectors Operation via 2 x 9 V block battery or power unit (not i

• Roadproof housing with rubber feet • Low distortion • 9V power supply ore 18-48V phantom power • Ground lift • -20 and -40dB Attenuation switch Frequency Response: 10Hz-40KHz Noise Level: 250KΩ Load Impedance: >600Ω Dimensions: 53 x 158 x 120 mm

• Jack & RCA inputs • 9V power supply ore 18-48V phantom power • Ground lift • Instrument & speaker inputs Frequency Response: 10Hz-40KHz Noise Level: < -105db Distortion (THD):

Audio Groundloop Isolator No power-supply needed In line connection No extra cables needed

• no power-supply needed • stereo in- and outputs • 4-in, 1out mixer • 1-in, 4out splitter Frequency Response: 20Hz-20KHz Inputs: 6,3 TRS Jack, Outputs: 6,3 TRS Jack Input Impedance: 1Meg Input Impedance: 50 kOhm Output Impedance: 12 KOhm Dimensi

10356321 Flexible routing configurations for all standard mono and stereo output operating modes 2 analog inputs and 4 analog outputs (XLR) Active frequency filter types (Bessel, Butterworth and Linkwitz-Riley) with slopes up to 24 dB/octave split up the

10356341 Flexible routing configurations for all standard mono and stereo output operating modes 2 analog inputs and 6 analog outputs (XLR) Active frequency filter types (Bessel, Butterworth and Linkwitz-Riley) with slopes up to 24 dB/octave split up the

10355020 For connecting 3 microphones e.g. to a line input of a mixing console 3 channels with separate level controls, phantom power and low cut Power/clip LED Inputs and outputs via balanced XLR connectors Operation via supplied power unit Power supply:

10355095 Quick and easy check of loudspeakers and sound systems - without assembling effort All you need is the LH-095 and a cable The optimum tool for sound engineers and rental companies Adjustable sinus frequency 20 Hz - 20 KHz Volume control Signal ou

A készülék feladata a mikrofonok és hanganyagot lejátszó készülékek jelének fogadása, elõerõsítése és keverése. Egy mikrofon és egy vonalszintû jel fogadására alkalmas Technikai adatok: Tápellátás: 12V-os DC adapter (tartozék) Max kimenõ szint: +28 dBm (

• Battery powered • Up to 50m • Receiver & Transmitter • 16 Channels The COM-ART is a PLL UHF wireless audio set. It contains one transmitter and one receiver. The smart and lightweight design enables you to plug the receiver directly on any amplifier

Aktive Frequenzweiche, Stereo-2-Wege und Mono-3-Wege-Betrieb 2-Wege-Stereo- oder 3-Wege-Mono-Betrieb Variable Linkwitz-Riley-Filter mit einer Flankensteilheit von 24 dB/Oktave Trennfrequenzen stufenlos regelbar von 45 Hz bis 9,6 kHz Summierbarer Subwoofer

GO 25 Specifications Type: Condenser Polar Pattern: Cardioid Frequency Response: 50Hz~15KHz Impedance: 2.2KΩ±30% Power Supply: 48V Phantom Power Sensitivity: -42 ± 3dBV/μbar Dimension (mm): ø21.5 x 90.5 Weight (without cable): 81 ± 10g XLR mail ou

Passive stand alone direct injection box (DI), ground-lift switch, Transformer Balanced output, handle signal level up to 100V line. Frequency Response: 10Hz-40KHz. Noise Level: 105dB. THD+N@1KHz/0dB: 250K Ω. Load Impedance: >600 Ω. Inputs: XLR & 1/4

4CH over network cable extender, CAT5E cable can used to transmit audio signal, AES/EBU digital signal, DMX signal, female?RJ45, 4 x female XLR.

4CH over network cable extender, CAT5E cable can used to transmit audio signal, AES/EBU digital signal, DMX signal, female?RJ45, 4 x male XLR.

3,5 jack audio leválasztó, földhuroktól létrejövő zaj esetén. Ground Loop Noise Isolator Audio Interface: 3.5mm Frequency response: 20HZ-20KHZ Audio input: stereo Size: 59X20X18mm

Profi kétcsatornás paszív DI box. A nemszimmetrikus /Jack 6,3/ bemenetek és szimmetrikus / XLR / kimenetek galvanikus elválasztását biztositja. Földelés leválasztó kapcsoló. Beálitható szintcsökkentés. 2x2 Jack 6,3mm bemenet, 2x1 XLR kimenet. Impedancia 5

Multi tester, elem táplálású

Inputs 2 (XLR) Outputs 6 (XLR) Input Level (Nominal / Max) 0 dBu / +23 dBu Input Dynamic Range 110 dB Output Level (Nominal / Max) 0 dBu / +12 dBu Fequency Response 20 Hz to 20 kHz (+/– 0.5 dB) A/D Converters 24–bit, 48 kHz Latency

Digital speaker management system, 4 input, 8 outputs full matrix mixing, 32 bit converters with 96khz sampling, USB Connection for PC or RJ45 LAN Connector for Long Distance Control, ? programmable PC Software, Low-Shelving Equalizer, Hi-Shelving Equaliz