Hangfalak erositovel (85)

Marshall 1959SLP gitárerősítő fej, 3xECC83 csöves előfok, 4xEL34 csöves végfok, 3 sávos EQ, FX loop Marshall 1959SLP 100w-os csöves fej Az 1959SLP erősítőfej a 60 -as évek végén, és a 70 -es évek elején nagy népszerűségnek örvendő 1959 -es, 100 W -os Su

A Marshall cég 50 W-os akusztikus gitárerősítője! A Marshall AS50R egy 50 Wattos kombó, amelyben 2db 8\" különleges hangolású hangszóró van és egy nagy hatásfokú piezo tweeter, amely tiszta és részletes hangzást tesz lehetővé

Eredeti Angol gyártmány! Nem a Viatnami modell! 2 csatorna (Classic és Ultra) 100 W teljesítmény (4db ECC83, 4db EL34) Lábkapcsolóval Tone Shift kapcsoló Deep switch kapcsoló FX Loop Accutronics rugós zengető Méret: 748x297x214 mm

A 100 Wattos JVM széria egy cső hajtotta erőmű, magába foglalja a klasszikus design-t, és a Marshall legendásan üvöltő JCM800, és Super Lead ,,Plexi" erősítőit. Időtlen alapját képezi minden klasszikus rock, és metal zenei hangzásnak, tartalmazva az elmúl

Marshall JCM800 Kerry King Signature erősítő 2203KK Kerry King erősítő Mennydörgő, sötét és fantasztikus metál hangszín, - bemutatásra kerül az új Kerry King JCM800 2203KK erősítő. A Marshall együttműködve Kerry King-el, új köntösbe bújtatta a legendás

The FA series of active amplifier module, designed for full range active speakers, using Class D circuit, modularized design, independent PWM fixed frequency modulation, to reduce the difference frequency of the self-excited circuit and multichannel inter

The FA series of active amplifier module, designed for full range active speakers, using Class D circuit, modularized design, independent PWM fixed frequency modulation, to reduce the difference frequency of the self-excited circuit and multichannel inter

The FA series of active amplifier module, designed for full range active speakers, using Class D circuit, modularized design, independent PWM fixed frequency modulation, to reduce the difference frequency of the self-excited circuit and multichannel inter

The FA series of active amplifier module, designed for full range active speakers, using Class D circuit, modularized design, independent PWM fixed frequency modulation, to reduce the difference frequency of the self-excited circuit and multichannel inter

The FA series of active amplifier module, designed for full range active speakers, using Class D circuit, modularized design, independent PWM fixed frequency modulation, to reduce the difference frequency of the self-excited circuit and multichannel inter

The BA series of active amplifier module, designed for active subwoofers, using Class D circuit, modularized design, independent PWM fixed frequency modulation, to reduce the difference frequency of the self-excited circuit and multichannel interference.

The BA series of active amplifier module, designed for active subwoofers, using Class D circuit, modularized design, independent PWM fixed frequency modulation, to reduce the difference frequency of the self-excited circuit and multichannel interference.

The SA series of active amplifier module, designed for active systems, using Class D circuit, modularized design, independent PWM fixed frequency modulation, to reduce the difference frequency of the self-excited circuit and multichannel interference. Bui

The SA series of active amplifier module, designed for active systems, using Class D circuit, modularized design, independent PWM fixed frequency modulation, to reduce the difference frequency of the self-excited circuit and multichannel interference. Bui

The SA series of active amplifier module, designed for active systems, using Class D circuit, modularized design, independent PWM fixed frequency modulation, to reduce the difference frequency of the self-excited circuit and multichannel interference. Bui

The SA series of active amplifier module, designed for active systems, using Class D circuit, modularized design, independent PWM fixed frequency modulation, to reduce the difference frequency of the self-excited circuit and multichannel interference. Bui

The SA series of active amplifier module, designed for active systems, using Class D circuit, modularized design, independent PWM fixed frequency modulation, to reduce the difference frequency of the self-excited circuit and multichannel interference. Bui

10355030 Distributes the signal of 1 audio source to 4 sets of headphones 4 channels with separate level controls and headphone outputs All connections via 6.3 mm jacks (1/4") Operation via supplied power unit Power supply: 12 V DC, 150 mA Input impedance

10355031 Distributes the signal of 1 audio source to 4 sets of headphones 1 stereo input (switchable to mono) via RCA, 3.5 mm and 6.3 mm jack connectors 4 separately controllable headphone outputs via 6.3 mm jacks Operation via supplied power unit Power s

• 4 Channels @ 1U Housing • Soft start technology • Individual brigde control • SMPS & Class-D amp Output power Stereo 4Ohm: 4x 200W Stereo 8Ohm: 4x 120W Bridge 8Ohm: 2x 400W Parameters S/N Ratio: >90dB Input sensitivity: 0,65V Input impedance:

4 Channels @ 1U Housing • Soft start technology • Individual brigde control • SMPS & Class-D amp Output power Stereo 4Ohm: 4x 400W Stereo 8Ohm: 4x 250W Bridge 8Ohm: 2x 800W Parameters S/N Ratio: >90dB Input sensitivity: 0,7V Input impedance: 20

• 4 Channels @ 1U Housing • Soft start technology • Individual brigde control • SMPS & Class-D amp Output power Stereo 4Ohm: 4x 600W Stereo 8Ohm: 4x 360W Bridge 8Ohm: 2x 1200W Parameters S/N Ratio: >90dB Input sensitivity: 0,775V Input impedanc

2 operating modes can be selected (stereo or bridged) Limiter, switchable Speaker switch-on delay 2 level controls Each channel with LED for activated protective circuit (protect) and output meter with clip LED Complete protection set against short-circui

2 operating modes can be selected (stereo or bridged) Limiter, switchable Speaker switch-on delay 2 level controls Each channel with LED for activated protective circuit (protect) and output meter with clip LED Complete protection set against short-circui

3 operating modes can be selected (stereo, parallel or bridged) Input sensitivity adjustable Speaker switch-on delay 2 level controls Each channel with LED for activated protective circuit (protect) and output meter with clip LED Complete protection set a

3 operating modes can be selected (stereo, parallel or bridged) Input sensitivity adjustable Speaker switch-on delay 2 level controls Each channel with LED for activated protective circuit (protect) and output meter with clip LED Complete protection set a

3 operating modes can be selected (stereo, parallel or bridged) Input sensitivity adjustable Speaker switch-on delay 4 level controls Each channel with LED for activated protective circuit (protect) and output meter with clip LED Complete protection set a

2 operating modes can be selected (stereo or bridged) Limiter, switchable Speaker switch-on delay 2 level controls Each channel with LED for activated protective circuit (protect) and output meter with clip LED Complete protection set against short-circui

2 operating modes can be selected (stereo or bridged) Limiter, switchable Speaker switch-on delay 2 level controls Each channel with LED for activated protective circuit (protect) and output meter with clip LED Complete protection set against short-circui

Műszaki adatok: – RMS teljesítmény: 2x500W / 4ohm, 2x350W / 8ohm – RMS teljesítmény hidalva (bridge): 1000W / 8ohm – MAX teljesítmény: 2x1000W / 4ohm, 2x700W / 8ohm – MAX teljesítmény hidalva (bridge): 2000W / 8ohm – Frekvencia átvitel: 20 Hz – 20kHz

Műszaki adatok: – RMS teljesítmény: 2x300W / 4ohm, 2x200W / 8ohm – RMS teljesítmény hidalva (bridge): 600W / 8ohm – MAX teljesítmény: 2x600W / 4ohm, 2x400W / 8ohm – MAX teljesítmény hidalva (bridge): 1200W / 8ohm – Frekvencia átvitel: 20 Hz – 20kHz –

2x150 Watt an 4 Ohm 2x85 Watt an 8 Ohm, Sym Inputs mit XLR und Klinke Brückenbetrieb möglich Speakon und Klemmanschlüsse für LS Out alle thomann Schutzschaltungen incl. Softstart,Eingangsempfindlichkeit von 0,775Vrms auf 1,4Vrms um- bzw auf 26dB Gai

The BA series of active amplifier module, designed for active subwoofers, using Class D circuit, modularized design, independent PWM fixed frequency modulation, to reduce the difference frequency of the self-excited circuit and multichannel interference.

2x 100 Watt an 4 Ohm 2x 65 Watt an 8 Ohm symmetrische Inputs mit XLR und Klinke Brückenbetrieb möglich Speakon und Klemmanschlüsse für thomann Speaker Out alle Schutzschaltungen inkl. Softstart Eingangspegel von -0 auf +4 db schaltbar Dämpfungsfakt

Mit geringer Einbautiefe von nur 308mm Leistung: 2x190W an 4 Ohm, 2x120W an 8 Ohm (@1kHz, THD 120 Eingänge: XLR, Klinke (symmetrisch) und Cinch Ausgänge: Speakon und Schraubklemmen Schutzschaltungen: DC, Kurzschlusssicherung, Übertemperaturschutz, Lim

2x 670W / 4 Ohm 2x 450 W / 8 Ohm 2x 800W / 2 Ohm 1x 1380W Brückenbetrieb 8 Ohm 1x 1600W Brückenbetrieb thomann 4 Ohm XLR In und Output Speakon Out Schutzschaltungen: Audio-Limiter, Temperatur und Kurzschluss Abmessungen: 484 x 350 x 97 mm 19" / 2

2x700W/4Ohm 2x450W/8Ohm Input Sensitivity 0,775V THD kleiner 0,05%/1kHz SlewRate 40V/µs Damping Factor 350: 1/1kHz/8Ohm kurzschlussicher Limiter Gewicht 17,5 kg In: Klinke und XLR Out: Speakon und Klemmanschluss Einbautiefe: 44cm 2 HE

2x525W/4Ohm 2x350W/8Ohm Input Sensitivity 0,775V SlewRate 40V/µs Damping Factor 300: 1/1kHz/8Ohm THD kleiner 0,05%/1kHz kurzschlussicher Limiter In: Klinke+XLR Out: Speakon+Klemmanschluss Abmessungen 483 x 103 x 475 mm Gewicht 16,4kg

Mit geringer Einbautiefe von nur 342mm Leistung: 2x 500W an 4 Ohm, 2x 350W an 8 Ohm (@1kHz, THD