Hangfalak n (292)

UHF Band 863-865 MHz plug-on transmission system for all condenser and dynamic microphones, range up to 100 meters, designed for professional stage and performance applications, RF Power: 10mW, IR Sync, power consumption: 10 hours. Frequency Range: 863-8

GO 25 Specifications Type: Condenser Polar Pattern: Cardioid Frequency Response: 50Hz~15KHz Impedance: 2.2KΩ±30% Power Supply: 48V Phantom Power Sensitivity: -42 ± 3dBV/μbar Dimension (mm): ø21.5 x 90.5 Weight (without cable): 81 ± 10g XLR mail ou

Passive stand alone direct injection box (DI), ground-lift switch, Transformer Balanced output, handle signal level up to 100V line. Frequency Response: 10Hz-40KHz. Noise Level: 105dB. THD+N@1KHz/0dB: 250K Ω. Load Impedance: >600 Ω. Inputs: XLR & 1/4

XLR Lengő alj DAP Nickel

Dap audio

Dap Audio

- Adjustable height: 90-130 cm - Pipe diameter: 35 mm - Loading capacity: 50 Kg

Specifications Base diameter: 130mm Min height: 230mm Max height: 370mm Thread: 5/8 & 3/8 Weight: 0,8Kg

XLR Lengő dugó DAP Nickel

USB/Bluetooth Compact size mixer - 2 MIC/LINE inputs with tones control (HI / LOW) - 2 stereo inputs - USB input with PLAY/PAUSE, VOL+/NEXT, VOL-/PREV, MODE/BT functions - PHANTOM power (+48V) - Main L/R output - Headphone and TAPE outputs - DELAY and REP

System: Bi-Amp 2-Way Active Speaker Continuous power: Low 90W / High 30W Horn Coverage: 90° H x 45° V Indicators: Power & Signal/Limit Power supply: 100-240VAC, 50/60Hz External controls: Volume SPL@1m: 113 dB (Max.) Frequency Response: 68Hz - 20kHz

Double Stud Flying Point for use with speaker anchor plates Can be used in angles up to 90°. Test certificates available

6,3 mono jack - 2 x 6,3 mono jack, hossz: 0,75 m

2x the box pro Achat 112 A Aktive horngeladene Box leistungsstarke aktive koaxiale horngeladene Box Bestückung: 12" Bass und 1,4" Mittelhochtöner Leistung: thomann 600 W Bi Amp Endstufenmodul (500 + 100 W) SPL: 104 dB/ (1W / 1m ) 135 dB/ Peak Frequenzbere

Audio Groundloop Isolator No power-supply needed In line connection No extra cables needed

System: Active Bi-Amp 12" Monitor Output Power: Class D, 350W LF power, 65W HF power Maximum SPL @1M: 124dB/ 127dB Peak Frequency resp. (-10dB): 65Hz – 20kHz Transducer Low: 12" Woofer, 2,56" Voice Coil Transducer High: 1" Neodymium Compression Drive

Profi kétcsatornás paszív DI box. A nemszimmetrikus /Jack 6,3/ bemenetek és szimmetrikus / XLR / kimenetek galvanikus elválasztását biztositja. Földelés leválasztó kapcsoló. Beálitható szintcsökkentés. 2x2 Jack 6,3mm bemenet, 2x1 XLR kimenet. Impedancia 5

Műszaki adatok: – RMS teljesítmény: 2x500W / 4ohm, 2x350W / 8ohm – RMS teljesítmény hidalva (bridge): 1000W / 8ohm – MAX teljesítmény: 2x1000W / 4ohm, 2x700W / 8ohm – MAX teljesítmény hidalva (bridge): 2000W / 8ohm – Frekvencia átvitel: 20 Hz – 20kHz

Műszaki adatok: – RMS teljesítmény: 2x300W / 4ohm, 2x200W / 8ohm – RMS teljesítmény hidalva (bridge): 600W / 8ohm – MAX teljesítmény: 2x600W / 4ohm, 2x400W / 8ohm – MAX teljesítmény hidalva (bridge): 1200W / 8ohm – Frekvencia átvitel: 20 Hz – 20kHz –

MONO mic/line inputs4 with compressor Mic mono/stereo line inputs2 Stereo line input2 Dimensions (W x H x D)340 x 100 x 416 mm Weight3,53 Kg MICROPONE IMPUT ConnectorBalanced XLR Impedance1.8 kΩ Frequency response20~20kHz +/-1dB Distortion (THD + N) only

24-bit DIGITAL Effects for a more creative MIX USB interface (PC/Mac) Optional USB or Bluetooth cards to connect any MP3 reader device MIC PREAMP for noise reduction and wider dynamic range 6,35 mm Stereo Jack INSERT to connect external devices such a

Inputs RMS Input Power 120 W Peak Input Power 400 W Passive Input Connection Speaker Connector 4 pole , Terminal Outputs Passive Output Connector Speaker Connector 4 pole Audio Specifications Speaker System 2-way Speaker Sensitivity (1 W/1 m)

150 W RMS, max SPL of 115 dB at 1 m Speaker sensitivity 94 dB/W at 1 m Full range (70 - 20,000 Hz) Dual-angle speaker flange (0° and 5°) Lightweight (12.5 kg) Inputs RMS Input Power 150 W Peak Input Power 550 W Passive Input Connection Speaker

150 W RMS, max SPL of 117 dB at 1 m Speaker sensitivity 96 dB/W at 1 m Full range (60 - 20,000 Hz) Dual-angle speaker flange (0° and 5°) Lightweight (14.6 kg) Inputs RMS Input Power 150 W Peak Input Power 550 W Passive Input Connection Speaker

150 W RMS, max SPL of 118 dB at 1 m Speaker sensitivity 96 dB/W at 1 m Full range (50 - 20,000 Hz) Dual-angle speaker flange (0° and 5°) Lightweight (20.2 kg) Inputs RMS Input Power 150 W Peak Input Power 550 W Passive Input Connection Speaker

300 W RMS, max SPL of 120 dB at 1 m Speaker sensitivity 94 dB/W at 1 m Plays down to 50 Hz (-6 dB) Lightweight (17.5 kg) M20 threaded pole mount Inputs RMS Input Power 300 W Peak Input Power 1200 W Passive Input Connection Speaker Connector 4 p

400 W RMS, max SPL of 121 dB at 1 m Speaker sensitivity 95 dB/W at 1 m Plays down to 50 Hz (-6 dB) Lightweight (22.5 kg) M20 threaded pole mount Inputs RMS Input Power 400 W Peak Input Power 1600 W Passive Input Connection Speaker Connector 4 p

400 W RMS, max SPL of 122 dB at 1 m Speaker sensitivity 95 dB/W at 1 m Plays down to 45 Hz (-6 dB) Lightweight (31.8 kg) M20 threaded pole mount Inputs RMS Input Power 400 W Peak Input Power 1600 W Passive Input Connection Speaker Connector 4 p

250 W RMS, max SPL of 124 dB at 1 m Lightweight (11.8 kg) Handles for mobile use Reinforced cabinet with scratch resistant painting 90°x45° dispersion for even coverage Inputs RMS Input Power 250 W Peak Input Power 500 W Passive Input Connection

300 W RMS, max SPL of 126 dB at 1 m Lightweight (16.3 kg) Handles for mobile use Reinforced cabinet with scratch resistant painting 75°x50° dispersion for even coverage Inputs RMS Input Power 300 W Peak Input Power 600 W Passive Input Connection