Hangfalak n (216)

System: Bi-Amp 2-Way Active Speaker Continuous power: Low 90W / High 30W Horn Coverage: 90° H x 45° V Indicators: Power & Signal/Limit Power supply: 100-240VAC, 50/60Hz External controls: Volume SPL@1m: 113 dB (Max.) Frequency Response: 68Hz - 20kHz

XLR Lengő alj DAP Nickel

Dap audio

Dap Audio

Double Stud Flying Point for use with speaker anchor plates Can be used in angles up to 90°. Test certificates available

Medium Base (Standard Household Size), 50 Watts, 230 Volts, PAR 30 Halogen Spot Light Bulb Long Life 5,660 Hours, Lasts Up To 10 Times Longer Than Standard Halogen Bulbs Uses 50 Watts To Provide 13% Energy Savings Compared to 50 Watt Halogen Bulbs

- Adjustable height: 90-130 cm - Pipe diameter: 35 mm - Loading capacity: 50 Kg

Specifications Base diameter: 130mm Min height: 230mm Max height: 370mm Thread: 5/8 & 3/8 Weight: 0,8Kg

XLR Lengő dugó DAP Nickel

6,3 mono jack - 2 x 6,3 mono jack, hossz: 0,75 m

2x the box pro Achat 112 A Aktive horngeladene Box leistungsstarke aktive koaxiale horngeladene Box Bestückung: 12" Bass und 1,4" Mittelhochtöner Leistung: thomann 600 W Bi Amp Endstufenmodul (500 + 100 W) SPL: 104 dB/ (1W / 1m ) 135 dB/ Peak Frequenzbere

Audio Groundloop Isolator No power-supply needed In line connection No extra cables needed

System: Active Bi-Amp 12" Monitor Output Power: Class D, 350W LF power, 65W HF power Maximum SPL @1M: 124dB/ 127dB Peak Frequency resp. (-10dB): 65Hz – 20kHz Transducer Low: 12" Woofer, 2,56" Voice Coil Transducer High: 1" Neodymium Compression Drive

Profi kétcsatornás paszív DI box. A nemszimmetrikus /Jack 6,3/ bemenetek és szimmetrikus / XLR / kimenetek galvanikus elválasztását biztositja. Földelés leválasztó kapcsoló. Beálitható szintcsökkentés. 2x2 Jack 6,3mm bemenet, 2x1 XLR kimenet. Impedancia 5

Műszaki adatok: – RMS teljesítmény: 2x500W / 4ohm, 2x350W / 8ohm – RMS teljesítmény hidalva (bridge): 1000W / 8ohm – MAX teljesítmény: 2x1000W / 4ohm, 2x700W / 8ohm – MAX teljesítmény hidalva (bridge): 2000W / 8ohm – Frekvencia átvitel: 20 Hz – 20kHz

Műszaki adatok: – RMS teljesítmény: 2x300W / 4ohm, 2x200W / 8ohm – RMS teljesítmény hidalva (bridge): 600W / 8ohm – MAX teljesítmény: 2x600W / 4ohm, 2x400W / 8ohm – MAX teljesítmény hidalva (bridge): 1200W / 8ohm – Frekvencia átvitel: 20 Hz – 20kHz –

Inputs RMS Input Power 120 W Peak Input Power 400 W Passive Input Connection Speaker Connector 4 pole , Terminal Outputs Passive Output Connector Speaker Connector 4 pole Audio Specifications Speaker System 2-way Speaker Sensitivity (1 W/1 m)

150 W RMS, max SPL of 115 dB at 1 m Speaker sensitivity 94 dB/W at 1 m Full range (70 - 20,000 Hz) Dual-angle speaker flange (0° and 5°) Lightweight (12.5 kg) Inputs RMS Input Power 150 W Peak Input Power 550 W Passive Input Connection Speaker

150 W RMS, max SPL of 117 dB at 1 m Speaker sensitivity 96 dB/W at 1 m Full range (60 - 20,000 Hz) Dual-angle speaker flange (0° and 5°) Lightweight (14.6 kg) Inputs RMS Input Power 150 W Peak Input Power 550 W Passive Input Connection Speaker

150 W RMS, max SPL of 118 dB at 1 m Speaker sensitivity 96 dB/W at 1 m Full range (50 - 20,000 Hz) Dual-angle speaker flange (0° and 5°) Lightweight (20.2 kg) Inputs RMS Input Power 150 W Peak Input Power 550 W Passive Input Connection Speaker

300 W RMS, max SPL of 120 dB at 1 m Speaker sensitivity 94 dB/W at 1 m Plays down to 50 Hz (-6 dB) Lightweight (17.5 kg) M20 threaded pole mount Inputs RMS Input Power 300 W Peak Input Power 1200 W Passive Input Connection Speaker Connector 4 p

400 W RMS, max SPL of 121 dB at 1 m Speaker sensitivity 95 dB/W at 1 m Plays down to 50 Hz (-6 dB) Lightweight (22.5 kg) M20 threaded pole mount Inputs RMS Input Power 400 W Peak Input Power 1600 W Passive Input Connection Speaker Connector 4 p

400 W RMS, max SPL of 122 dB at 1 m Speaker sensitivity 95 dB/W at 1 m Plays down to 45 Hz (-6 dB) Lightweight (31.8 kg) M20 threaded pole mount Inputs RMS Input Power 400 W Peak Input Power 1600 W Passive Input Connection Speaker Connector 4 p

250 W RMS, max SPL of 124 dB at 1 m Lightweight (11.8 kg) Handles for mobile use Reinforced cabinet with scratch resistant painting 90°x45° dispersion for even coverage Inputs RMS Input Power 250 W Peak Input Power 500 W Passive Input Connection

300 W RMS, max SPL of 126 dB at 1 m Lightweight (16.3 kg) Handles for mobile use Reinforced cabinet with scratch resistant painting 75°x50° dispersion for even coverage Inputs RMS Input Power 300 W Peak Input Power 600 W Passive Input Connection

400 W RMS max SPL of 128 dB at 1 m Lightweight (25 kg) Handles for mobile use Reinforced cabinet with scratch resistant painting 75°x50° dispersion for even coverage Inputs RMS Input Power 400 W Peak Input Power 800 W Passive Input Connection S

600 W RMS, max SPL of 131 dB at 1 m 15” die-cast woofer with 4” voice coil Optimised for best size/weight to SPL output ratio M20/35 mm Pole Mount Inputs RMS Input Power 600 W Peak Input Power 1200 W Passive Input Connection Speaker Connector 4

800 W RMS, max SPL of 133 dB at 1 m 18” die-cast woofer with 4” voice coil Optimised for best size/weight to SPL output ratio M20/35 mm Pole Mount Inputs RMS Input Power 800 W Peak Input Power 1600 W Passive Input Connection Speaker Connector 4

180 W RMS, max SPL of 114 dB at 1 m 80 - 20,000 Hz frequency range Bluetooth 5.0 with True Wireless Stereo (TWS) Dedicated mic and line inputs Internal DSP with 4 modes Seamless integration of NRG series subwoofer Outputs Power Amplifier RMS Output

180 W RMS, max SPL of 115 dB at 1 m 70 - 20,000 Hz frequency range Bluetooth 5.0 with True Wireless Stereo (TWS) Dedicated mic and line inputs Internal DSP with 4 modes Seamless integration of NRG series subwoofer Outputs Power Amplifier RMS Output

180 W RMS, max SPL of 117 dB at 1 m 60 - 20,000 Hz frequency range Bluetooth 5.0 with True Wireless Stereo (TWS) Dedicated mic and line inputs Internal DSP with 4 modes Seamless integration of NRG series subwoofer Outputs Power Amplifier RMS Output

180 W RMS, max SPL of 118 dB at 1 m 50 - 20,000 Hz frequency range Bluetooth 5.0 with True Wireless Stereo (TWS) Dedicated mic and line inputs Internal DSP with 4 modes Seamless integration of NRG series subwoofer Outputs Power Amplifier RMS Output

500 W RMS, max SPL of 120 dB at 1 m 50 - 170 Hz frequency range Internal DSP with 4 modes Seamless integration with NRG series active full-range speaker Lightweight (20.3 kg) Outputs Power Amplifier RMS Output 500 W Power Amplifier Peak Output 10

500 W RMS, max SPL of 121 dB at 1 m 50 - 170 Hz frequency range Internal DSP with 4 modes Seamless integration with NRG series active full-range speaker Lightweight (25.5 kg) Outputs Power Amplifier RMS Output 500 W Power Amplifier Peak Output 10

500 W RMS, max SPL of 122 dB at 1 m 45 - 170 Hz frequency range Internal DSP with 4 modes Seamless integration with NRG series active full-range speaker Lightweight (33.3 kg) Outputs Power Amplifier RMS Output 500 W Power Amplifier Peak Output 10

1000 W RMS, max SPL of 134 dB at 1m (column) 40 - 20,000 Hz frequency range Tri-amp Microphone, line and Bluetooth 5.0 inputs with TWS Cables, mounting poles and spacer included Outputs Power Amplifier RMS Output 1000 W Power Amplifier Peak Output