Kiegeszitok (66)

Swivel in horizontal and vertical position - Loading capacity: 30 kg - Mounting plate: 20*11,5 cm - Arm length: 29 cm

- Adjustable height: 90-130 cm - Pipe diameter: 35 mm - Loading capacity: 50 Kg

Specifications Base diameter: 130mm Min height: 230mm Max height: 370mm Thread: 5/8 & 3/8 Weight: 0,8Kg

Audio Groundloop Isolator No power-supply needed In line connection No extra cables needed

6,3 mono jack - 2 x 6,3 mono jack, hossz: 0,75 m

Single Point Flying Stud for use with speaker anchor plates. Can be used in a maximum angle of 30°.

Műszaki adatok: – RMS teljesítmény: 2x500W / 4ohm, 2x350W / 8ohm – RMS teljesítmény hidalva (bridge): 1000W / 8ohm – MAX teljesítmény: 2x1000W / 4ohm, 2x700W / 8ohm – MAX teljesítmény hidalva (bridge): 2000W / 8ohm – Frekvencia átvitel: 20 Hz – 20kHz

Műszaki adatok: – RMS teljesítmény: 2x300W / 4ohm, 2x200W / 8ohm – RMS teljesítmény hidalva (bridge): 600W / 8ohm – MAX teljesítmény: 2x600W / 4ohm, 2x400W / 8ohm – MAX teljesítmény hidalva (bridge): 1200W / 8ohm – Frekvencia átvitel: 20 Hz – 20kHz –

Two way crossover for speaker box - Crossover frequency: 3000Hz - Package: 1 piece each box

Fali tartó Xi-8 hangfalhoz

Dap Asztali gémes mikrofon állvány Crome

Swivel in horizontal and vertical position - Loading capacity: 30 kg - Length: 39 cm

Dynamic microphone uni-directional - Metal body - Sensitivity -52dB +/-3dB. - Impendance 600 Ohm +/-30%. - Frequency response 50 - 15000 Hz. - Bag and professional low-noise cable included (4.6 m.)

Dynamic microphone uni-directional - Metal body - ON/OFF switch - Sensitivity -52dB +/-3dB. - Impendance 600 Ohm +/-30%. - Frequency response 50 - 15000 Hz. - Bag and professional low-noise cable included (4.6 m.)

Fali tartó Xi-5 hangfalhoz

Fali tartó Xi-6 hangfalhoz

Állvány adapetr GIG-62, GIG-83CFX, GIG-104C keverőhöz

USB/Bluetooth Compact size mixer - 2 MIC/LINE inputs with tones control (HI / LOW) - 2 stereo inputs - USB input with PLAY/PAUSE, VOL+/NEXT, VOL-/PREV, MODE/BT functions - PHANTOM power (+48V) - Main L/R output - Headphone and TAPE outputs - DELAY and REP

Double Stud Flying Point for use with speaker anchor plates Can be used in angles up to 90°. Test certificates available

Inputs RMS Input Power 120 W Peak Input Power 400 W Passive Input Connection Speaker Connector 4 pole , Terminal Outputs Passive Output Connector Speaker Connector 4 pole Audio Specifications Speaker System 2-way Speaker Sensitivity (1 W/1 m)

150 W RMS, max SPL of 115 dB at 1 m Speaker sensitivity 94 dB/W at 1 m Full range (70 - 20,000 Hz) Dual-angle speaker flange (0° and 5°) Lightweight (12.5 kg) Inputs RMS Input Power 150 W Peak Input Power 550 W Passive Input Connection Speaker

150 W RMS, max SPL of 117 dB at 1 m Speaker sensitivity 96 dB/W at 1 m Full range (60 - 20,000 Hz) Dual-angle speaker flange (0° and 5°) Lightweight (14.6 kg) Inputs RMS Input Power 150 W Peak Input Power 550 W Passive Input Connection Speaker

150 W RMS, max SPL of 118 dB at 1 m Speaker sensitivity 96 dB/W at 1 m Full range (50 - 20,000 Hz) Dual-angle speaker flange (0° and 5°) Lightweight (20.2 kg) Inputs RMS Input Power 150 W Peak Input Power 550 W Passive Input Connection Speaker

300 W RMS, max SPL of 120 dB at 1 m Speaker sensitivity 94 dB/W at 1 m Plays down to 50 Hz (-6 dB) Lightweight (17.5 kg) M20 threaded pole mount Inputs RMS Input Power 300 W Peak Input Power 1200 W Passive Input Connection Speaker Connector 4 p

400 W RMS, max SPL of 121 dB at 1 m Speaker sensitivity 95 dB/W at 1 m Plays down to 50 Hz (-6 dB) Lightweight (22.5 kg) M20 threaded pole mount Inputs RMS Input Power 400 W Peak Input Power 1600 W Passive Input Connection Speaker Connector 4 p

400 W RMS, max SPL of 122 dB at 1 m Speaker sensitivity 95 dB/W at 1 m Plays down to 45 Hz (-6 dB) Lightweight (31.8 kg) M20 threaded pole mount Inputs RMS Input Power 400 W Peak Input Power 1600 W Passive Input Connection Speaker Connector 4 p

250 W RMS, max SPL of 124 dB at 1 m Lightweight (11.8 kg) Handles for mobile use Reinforced cabinet with scratch resistant painting 90°x45° dispersion for even coverage Inputs RMS Input Power 250 W Peak Input Power 500 W Passive Input Connection

300 W RMS, max SPL of 126 dB at 1 m Lightweight (16.3 kg) Handles for mobile use Reinforced cabinet with scratch resistant painting 75°x50° dispersion for even coverage Inputs RMS Input Power 300 W Peak Input Power 600 W Passive Input Connection

400 W RMS max SPL of 128 dB at 1 m Lightweight (25 kg) Handles for mobile use Reinforced cabinet with scratch resistant painting 75°x50° dispersion for even coverage Inputs RMS Input Power 400 W Peak Input Power 800 W Passive Input Connection S

600 W RMS, max SPL of 131 dB at 1 m 15” die-cast woofer with 4” voice coil Optimised for best size/weight to SPL output ratio M20/35 mm Pole Mount Inputs RMS Input Power 600 W Peak Input Power 1200 W Passive Input Connection Speaker Connector 4

800 W RMS, max SPL of 133 dB at 1 m 18” die-cast woofer with 4” voice coil Optimised for best size/weight to SPL output ratio M20/35 mm Pole Mount Inputs RMS Input Power 800 W Peak Input Power 1600 W Passive Input Connection Speaker Connector 4

180 W RMS, max SPL of 114 dB at 1 m 80 - 20,000 Hz frequency range Bluetooth 5.0 with True Wireless Stereo (TWS) Dedicated mic and line inputs Internal DSP with 4 modes Seamless integration of NRG series subwoofer Outputs Power Amplifier RMS Output

180 W RMS, max SPL of 115 dB at 1 m 70 - 20,000 Hz frequency range Bluetooth 5.0 with True Wireless Stereo (TWS) Dedicated mic and line inputs Internal DSP with 4 modes Seamless integration of NRG series subwoofer Outputs Power Amplifier RMS Output

180 W RMS, max SPL of 117 dB at 1 m 60 - 20,000 Hz frequency range Bluetooth 5.0 with True Wireless Stereo (TWS) Dedicated mic and line inputs Internal DSP with 4 modes Seamless integration of NRG series subwoofer Outputs Power Amplifier RMS Output

180 W RMS, max SPL of 118 dB at 1 m 50 - 20,000 Hz frequency range Bluetooth 5.0 with True Wireless Stereo (TWS) Dedicated mic and line inputs Internal DSP with 4 modes Seamless integration of NRG series subwoofer Outputs Power Amplifier RMS Output

500 W RMS, max SPL of 120 dB at 1 m 50 - 170 Hz frequency range Internal DSP with 4 modes Seamless integration with NRG series active full-range speaker Lightweight (20.3 kg) Outputs Power Amplifier RMS Output 500 W Power Amplifier Peak Output 10

500 W RMS, max SPL of 121 dB at 1 m 50 - 170 Hz frequency range Internal DSP with 4 modes Seamless integration with NRG series active full-range speaker Lightweight (25.5 kg) Outputs Power Amplifier RMS Output 500 W Power Amplifier Peak Output 10

500 W RMS, max SPL of 122 dB at 1 m 45 - 170 Hz frequency range Internal DSP with 4 modes Seamless integration with NRG series active full-range speaker Lightweight (33.3 kg) Outputs Power Amplifier RMS Output 500 W Power Amplifier Peak Output 10

1000 W RMS, max SPL of 134 dB at 1m (column) 40 - 20,000 Hz frequency range Tri-amp Microphone, line and Bluetooth 5.0 inputs with TWS Cables, mounting poles and spacer included Outputs Power Amplifier RMS Output 1000 W Power Amplifier Peak Output