Hangfal p (116)

Specifications Speaker system: 2-way Full Range Continues power: 40 Watt Peak power: 80 Watt Impedance: 8 Ohm Sensitivity W/m: 88dB LF Driver: 4" HF Driver: 0,5" Dome Tweeter Dispersion: 110 x90° HxV Frequency Response: 100Hz-20.000Hz (-3dB) Mou

Specifications Speaker system: 2-way Full Range Continues power: 40 Watt Peak power: 80 Watt Impedance: 8 Ohm Sensitivity W/m: 88dB LF Driver: 4" HF Driver: 0,5" Dome Tweeter Dispersion: 110 x90° HxV Frequency Response: 100Hz-20.000Hz (-3dB) Mou

Specifications Nominal Impedance: 8 Ohm Continuous power: 30W Program power: 60W Peak power: 90W Array RMS power: 60W (2pcs @ 4 Ohm) 120W (4pcs @ 8 Ohm) 180W (6pcs @ 5,3 Ohm) 240W (8pcs @ 4Ohm) Components: 4" Neodymium woofer + 3x 0,5" dome tweet

Specifications Nominal Impedance: 8 Ohm Continuous power: 30W Program power: 60W Peak power: 90W Array RMS power: 60W (2pcs @ 4 Ohm) 120W (4pcs @ 8 Ohm) 180W (6pcs @ 5,3 Ohm) 240W (8pcs @ 4Ohm) Components: 4" Neodymium woofer + 3x 0,5" dome tweet

Specifications Speaker system: 2-way Full Range Continues power: 60 Watt Peak power: 120 Watt Impedance: 8 Ohm Sensitivity W/m: 89dB LF Driver: 5,25" HF Driver: 0,5" Dome Tweeter Dispersion: 110 x90° HxV Frequency Response: 80Hz-20.000Hz (+/-3dB)

Specifications Speaker system: 2-way Full Range Continues power: 60 Watt Peak power: 120 Watt Impedance: 8 Ohm Sensitivity W/m: 89dB LF Driver: 5,25" HF Driver: 0,5" Dome Tweeter Dispersion: 110 x90° HxV Frequency Response: 80Hz-20.000Hz (+/-3dB)

Specifications Speaker system: 2-way Full Range Continues power: 70 Watt Peak power: 140 Watt Impedance: 8 Ohm Sensitivity W/m: 90dB LF Driver: 6,5" HF Driver: 1" Dome Tweeter Dispersion: 110 x90° HxV Frequency Response: 50Hz-20.000Hz (-3dB) Mou

Specifications Speaker system: 2-way Full Range Continues power: 70 Watt Peak power: 140 Watt Impedance: 8 Ohm Sensitivity W/m: 90dB LF Driver: 6,5" HF Driver: 1" Dome Tweeter Dispersion: 110 x90° HxV Frequency Response: 50Hz-20.000Hz (-3dB) Mou

System: Bi-Amp 2-Way Active Speaker Continuous power: Low 90W / High 30W Horn Coverage: 90° H x 45° V Indicators: Power & Signal/Limit Power supply: 100-240VAC, 50/60Hz External controls: Volume SPL@1m: 113 dB (Max.) Frequency Response: 68Hz - 20kHz

System: Bi-Amp 2-Way Active Speaker Continuous power: Low 90W / High 30W Horn Coverage: 90° H x 45° V Indicators: Power & Signal/Limit Power supply: 100-240VAC, 50/60Hz External controls: Volume SPL@1m: 116 dB (Max.) Frequency Response: 65Hz - 20kHz

Ultra-low noise discrete MIC Preamps with +48V Phantom Power • 3-band EQ and Peak LEDs on each MIC channels. 2-band EQ and Peak LEDs on Stereo channels. • AUX Sends per channel for external effects and monitoring. Mono Channels Mic Input: XLR balanced

• Ultra-low noise discrete MIC Preamps with +48V Phantom Power • Compressors control on first MIC channels • 3-band EQ and Peak LEDs on each MIC channels. 2-band EQ and Peak LEDs on Stereo channels. • Built-in 24-bit DSP effect with 100 presets. • opt

Ultra-low noise discrete MIC Preamps with +48V Phantom Power • Compressors control on first MIC channels • 3-band EQ and Peak LEDs on each MIC channels. 2-band EQ and Peak LEDs on Stereo channels. • 1 AUX Sends POST Fader • Optional expandable with USB

• Ultra-low noise discrete MIC Preamps with +48V Phantom Power • Compressors control on first MIC channels • 3-band EQ and Peak LEDs on each MIC channels. 2-band EQ and Peak LEDs on Stereo channels. • Built-in 24-bit DSP effect with 100 presets. • Opt

• 4 Channels @ 1U Housing • Soft start technology • Individual brigde control • SMPS & Class-D amp Output power Stereo 4Ohm: 4x 200W Stereo 8Ohm: 4x 120W Bridge 8Ohm: 2x 400W Parameters S/N Ratio: >90dB Input sensitivity: 0,65V Input impedance:

4 Channels @ 1U Housing • Soft start technology • Individual brigde control • SMPS & Class-D amp Output power Stereo 4Ohm: 4x 400W Stereo 8Ohm: 4x 250W Bridge 8Ohm: 2x 800W Parameters S/N Ratio: >90dB Input sensitivity: 0,7V Input impedance: 20

• 4 Channels @ 1U Housing • Soft start technology • Individual brigde control • SMPS & Class-D amp Output power Stereo 4Ohm: 4x 600W Stereo 8Ohm: 4x 360W Bridge 8Ohm: 2x 1200W Parameters S/N Ratio: >90dB Input sensitivity: 0,775V Input impedanc

• Ultra-low noise discrete MIC Preamps with +48V Phantom Power • Compressors control on first 6 MIC channels • 3-band EQ with sweepable MID and Peak LEDs on each MIC channels. 4-band EQ and Peak LEDs on Stereo channels. • Built-in 24-bit DSP effect wit

• Ultra-low noise discrete MIC Preamps with +48V Phantom Power • Compressors control on first 8 MIC channels • 3-band EQ with sweepable MID and Peak LEDs on each MIC channels. 4-band EQ and Peak LEDs on Stereo channels. • Built-in 24-bit DSP effect wit

Weight: 7,64 kg Dimensions: 540 x 425 x 210 mm (LxWxH)

Type: Condenser Freq. response: 20 Hz - 20 kHz (-3 dB) Polar pattern: cardioid, figure-of-8, omni switchable Sensitivity: 8 mV / Pa -42 dB - Max. SPL: 130 dB / 140 dB switchable Impedance: 200 Ohm Power supply: 48V Phantom power Connector: 3p. XLR

• Selectable splitter/mixer function • Wide range headroom • 8 inputs • 8 outputs The AS-8 can be used for several purposes. Due to its intelligent design the users can easily switch between a controllable audio mixer with several inputs, or a signal s

• Jack TRS & RCA input • Separate volume control • 2x 4 outputs • Road proof housing Frequency Response: 20Hz-20KHz Inputs: 6,3 TRS Jack, RCA Outputs: 6,3 TRS Jack (8x) Output impedance: 2x 50 Ohm Output power: 2x 50mW @ 32Ohm Power supply: 18V A

• 48 Khz, 64Bits Sample rate • 5 parametric EQ's each in- and output • USB interface and user-friendly software included • 50 User Presets DSP: Sample rate: 48 kHz, 64 bits NXP (Philips) DSP 5-Bands Input EQ: EQ Selections: Allpass, Bell, High Shelf,

• 48 Khz, 64Bits Sample rate • 5 parametric EQ's each in- and output • USB interface and user-friendly software included • 50 User Presets DSP: Sample rate: 48 kHz, 64 bits NXP (Philips) DSP 5-Bands Input EQ: EQ Selections: Allpass, Bell, High Shelf, L

Main features: • lightweight • professional materials • stackable • "All-weather" proof • available as 4, 6, 8, 10, 12 and 16U • Butterfly lock • Front and rear rack-strips Specifications Dimensions: 535 x 565 x 466 mm (LxWxH) Weight: 15,3 kg

Main features: • lightweight • professional materials • stackable • "All-weather" proof • available as 4, 6, 8, 10, 12 and 16U • Butterfly lock • Front and rear rack-strips Specifications Dimensions: 535 x 565 x 555 mm (LxWxH) Weight: 20 kg

Main features: • lightweight • professional materials • stackable • "All-weather" proof • available as 4, 6, 8, 10, 12 and 16U • Butterfly lock • Front and rear rack-strips Specifications Dimensions: 535 x 565 x 660 mm (LxWxH) Weight: 22,5 kg

Main features: • lightweight • professional materials • stackable • "All-weather" proof • available as 4, 6, 8, 10, 12 and 16U • Butterfly lock • Front and rear rack-strips Specifications Dimensions: 550 x 557 x 775 mm (LxWxH) Weight: 27 kg

Specifications Measurements: 546 x 463 x 214 mm Weight: 8,2Kg

Specifications Measurements: 534 x 442 x 385 mm Weight: 13,7Kg

Specifications Dimensions: 530 x 400 x 260 mm (LxWxH) Weight: 8,5 kg

Specifications Measurements: 522 x 456 x 609 mm Weight: 25,5Kg

Type: Back Electret Condenser Polar pattern: Super Cardioid Freq. response: 50~16000 Hz Sensitivity (1000 Hz): 7 mv/Pa* (*1 Pa = 94 dB SPL) Max. SPL: 137 dB (THD ? 1% 1000 Hz) Impedance: 200 Ohm Power supply: 9~48 Phantom Connector: 3p. XLR (male-t

Adjustable Speakerbracket 35mm Max load 50Kg Max. load: 50 kg.

D1943 Frequency Response: 10Hz-40KHz Noise Level: 250KΩ Load Impedance: >600 Ω Dimensions: 55 x 135 x 145mm (HxWxD) Weight: 0,65 Kg

Input: 6,3mm Jack Link: 6,3mm Jack Output: XLR Male Input Impedance: 50,000 Ohms Output Impedance: 500 Ohms Frequency Response: 30 – 50,000 Hz (1 dB) THD at 400 Hz: 0.003% Fixed Natural Attenuation: 20 dB Attenuation Settings: 0, 20, 40 dB Crosstal

Fali tartó Xi-3 rendszerhez

Falitartó Xi-3 rendszerhez

Specifications Nominal Impedance: 4 Ohm Continuous power: 300W Program power: 600W Peak power: 900W Components: 12" woofer with 2,5" VC Freq response (Processed): 42 - 150 Hz Freq response (Flat, -10dB): 42 – 2.800 Hz Recommended HPF: 42Hz, BW-24